Standalone Firmware Update

Manual Firmware Update Using A USB Drive

Prepare The USB Drive

For the USB drive, FAT32 format is required. The size should be less than or equal to 8GB.

  1. Please download the zip file provided to you.

  2. Unzip the downloaded zip file and save the firmware file(s) in a USB drive.
    DO NOT put them in any folder.

Update firmware for Yardian Pro

  1. Insert the USB drive, then press the reboot button.

  2. Press and hold both the select button and run/stop button immediately when the LED turns red.
    Release the buttons when you see the LED turn blue. The LED will continue to change colors (red -> blue -> green) while installing the firmware.

    Please DO NOT turn off the power during this process.

  3. The system will be rebooted automatically when the update is completed. You can remove the USB drive when the LED is not red.